Work harness that you can use not only for the maintenance of wind turbines. It is also suitable for work at height and service activities in telecommunications or the construction industry. WIND MASTER has a lot of features, but its main extras are the waist belt with the plastic back cover equipped with the durable glides and the front EN 361 LADDER CONNECTION POINT.

  • harness is equipped with classic EN 361 front and rear attachment points for fall arrest; the rear point is recessed into the padding so it does not impede movement in confined spaces when not in use
  • in addition, there is the specific EN 361 LADDER CONNECTION POINT on the front under the chest for connection to EN 353-1 fall arrest systems, which allows freer movement on secured ladders and structures
  • if a fall is caught by the LADDER CONNECTION POINT, the auxiliary seams are ripped out and the point changes its position so that the user is not in danger of being turned head down
  • wide waist belt with the plastic back cover equipped with the durable glides ensures comfortable movement and rest on fall arrest systems even in confined spaces
  • shoulders have removable loops in the front for parking shock absorber hooks when they are not in use; under heavier loads, the loop is released so that a shock absorber can be safely deployed in the event of a fall
  • upper parts of the shoulders have EN 1497 textile loops for pulling the user out in case of rescue from a confined space
  • EN 813/EN 358 front attachment point located in the front serves for resting, lowering and work positioning
  • additional work positioning options are offered by the two EN 358 swing-out attachment points on the sides of the waist belt
  • SPEED buckles on the leg loops and at the waist ensure smooth and quick putting on of the harness, leaving more time for efficient work
  • padding on the leg loops and shoulder straps evenly distributes the user's weight and thus reduces strain and fatigue
  •  waist belt is equipped with two standard textile loops with a load capacity of 15 kg, so the necessary equipment is always at hand
  • steel buckles are E-coated for increased corrosion resistance in wet and salty environments
  • slots at the waist belt for PORTER and PORTER XL tool holder to carry your tools and gear
  • using an additional carabiner, the CAM CLEAN chest ascender can be attached to the harness
  • whether you're an experienced wind power technician or a newcomer to the industry, WIND MASTER guarantees you first-class comfort and functionality
Colorblack with yellow
Weight2400 g [size M/L] • 84 oz
SizeS, M/L, XL
Max. rated load150 kg
ce 1019 EN 358 EN 361 EN 813 EN 1497


Work harness for masters who care about wind turbines.

Size table

Tabulka velikostí
A (cm) 65-80 75-100 85-130
A (in) 25-31 29-39 33-51
B (cm) 45-60 50-75 50-75
B (in) 18-24 19-29 19-29
C (cm) 150-170 160-180 175-205
C (ft) 4.9–5.6 5.3-5.9 5.7–6.7


catalogue sheet PDF - 0,6 MB
instructions of use PDF - 0,8 MB
technical parameters PDF - 0,6 MB
Activities at height such as climbing, via ferrata, caving, rappelling, ski-touring, rescue, work at height and exploration are dangerous activities, which may lead to severe injury or even death. This the following is essential before use:
careful reading and understanding of the instructions for useacquaintance with the possibilities and limitations of the productadequate apprenticeship in appropriate techniques and methods of useunderstanding and acceptance of the risk involved
In case of doubt or problem of understanding, contact SINGING ROCK.