GLUE-IN ANCHOR
GLUE-IN ANCHOR / RK703XX10
Stainless steel glue-in anchor for creating a fixed anchor point
Stainless steel glue-in anchor for creating a fixed anchor point
- shape of the stem allows the resin to be distributed throughout the hole, ensuring a secure anchor point
- smooth eye allows the rope to be threaded through safely, for example when retreating from a climbing route
- made of AISI 316 stainless steel
- for drilled holes with a diameter of 12 mm
- to fix the anchor securely in the drilled hole, we recommend using a two-component anchoring resin applied with a dispensing gun (the appropriate type for the specific conditions must be selected according to the resin manufacturer’s instructions)
| Weight | 120 g • 4.23 oz |
|---|---|
| Material | stainless steel |
| Strength | radial 35 kN, axial 25 kN |
| Length | 80 mm (shaft) |
| Diameter | 10 mm (diameter of hole for the shaft: 12 mm) |
EN 959
EN 795 type A
Download
catalogue sheet
PDF - 0,2 MB
instructions of use
PDF - 1,0 MB
Related goods
Activities at height such as climbing, via ferrata, caving, rappelling, ski-touring, rescue, work at height and exploration are dangerous activities, which may lead to severe injury or even death. This the following is essential before use:
careful reading and understanding of the instructions for useacquaintance with the possibilities and limitations of the productadequate apprenticeship in appropriate techniques and methods of useunderstanding and acceptance of the risk involved
In case of doubt or problem of understanding, contact SINGING ROCK.
careful reading and understanding of the instructions for useacquaintance with the possibilities and limitations of the productadequate apprenticeship in appropriate techniques and methods of useunderstanding and acceptance of the risk involved
In case of doubt or problem of understanding, contact SINGING ROCK.