Search

ARACORD / W2611
availability - Q1 2027
Lightweight, heat-resistant, and versatile sewn Prusik sling made of hollow aramid rope for multipitch and alpine climbing.

  • it is the ideal solution for securing your rappels and performing quick hauling systems, can be also used as an anchor sling
  • with a diameter of 7 mm has excellent knotability, easy handling and high comfort during installation of friction hitches
  • rope ends are interlocked and secured by strength stitching, the entire loop circumference is smooth and without any significant transitions
  • Aracord is attached from the harness to the rappel rope on the brake-hand side, just below the rappel device, to create a friction hitch (such as a Prusik or Machard knot)
  • designed to fit all rope diameters
  • certified according to EN 566, Aracord ensures exceptional strength of 22 kN, even in case of significant heating due to friction
Coloryellow
Weight24 g (35 cm); 31 g (50 cm); 36 g (60 cm)
0,8 oz (13,8 in); 1,1 oz (20 in); 1,3 oz (23,6 in)
Material95 % aramid, 5% PAD
Strength22 kN
Max. load1 person
Length35, 50 and 60 cm • 13.8, 20 and 23.6 in
Diameter7 mm
ce 1019 EN 566
Activities at height such as climbing, via ferrata, caving, rappelling, ski-touring, rescue, work at height and exploration are dangerous activities, which may lead to severe injury or even death. This the following is essential before use:
careful reading and understanding of the instructions for useacquaintance with the possibilities and limitations of the productadequate apprenticeship in appropriate techniques and methods of useunderstanding and acceptance of the risk involved
In case of doubt or problem of understanding, contact SINGING ROCK.