SNAKE BRACE

SNAKE BRACE / W201*
Anchor point for through holes, designed to function as a link between the structure and the fall arrest, work positioning, rope access or rescue systems.

  • intended for through holes whose minimum and maximum diameter corresponds to the type of Snake Brace in relation to the actual thickness of the current structure
  • the opening need not be entirely regular but the minimum diameter must be flat; there must be a minimum space for installation behind the hole
  • intended for a single user
  • the maximum strength can be used only if the structure in which the anchor hole is located can withstand the load in all directions
  • the minimum strength of the construction should be designed according to EN 795 (if not in accordance with EN 795, the load bearing capacity may be reduced)
  • Snake Brace can be loaded in any direction only if also allowed by the construction in which is anchored
  • can be used only with compatible connectors with locking mechanisms according to EN 362

    Type

    Length

    Code

      S   300
      300 mm
    W2018Y030
      S   600
      600 mm
    W2018A060
      S   900
      900 mm
    W2018R090
      S 1200

    1200 mm

    W2018B120
      M   300
      300 mm
    W2019Y030
      M   600
      600 mm
    W2019A060
      M   900
      900 mm
    W2019R090
      M 1200
    1200 mm

    W2019B120


Weight: S 300 - 162 g (5.71 oz); M 300 - 395 g (13.93 oz)
Material: S - dyneema, alloy, steel; M - PAD, alloy, steel
Strength: 18 kN
Length: 30, 60, 90, 120 cm

Download

high resolution picture instructions of use

Related video

SNAKE BRACE in action

1019, EN 795B

Related goods

  • PILOT

    PILOT

    Removable anchor point for fall protection and multi-use / size 3/4" / strength 22 kN / weight 200 g

  • D - MOBILE

    D - MOBILE

    Door or window anchor point / very fast and easy to set up / max. spacing of the frame 1100 mm

  • BANTAM BEAMER

    BANTAM BEAMER

    Removable anchor point for construction girders / span 89 - 355 mm / strength 22 kN / weight 1500 g

  • FINE LINE

    FINE LINE

    Mobile anchoring system / length 10, 15, 20 m / without transport bag / EN 795B

  • REACTOR 3

    REACTOR 3

    Tear webbing fall absorber with lanyard I or lanyard Y / max. length 200 cm / EN 355

  • JOULE 120

    JOULE 120

    Fall absorber / length 120 cm / length after fall arrest 200 - 203 cm / EN 355

  • HANGER WITH BOLT / stainless steel

    HANGER WITH BOLT / stainless steel

    Hanger plates with bolts for permanent anchor point / bolt diameter 10 or 12 mm / 25 kN

Warning

Activities at height such as climbing, via ferrata, caving, rappelling, ski-touring, rescue, work at height and exploration are dangerous activities, which may lead to severe injury or even death.
This the following is essential before use:

  • careful reading and understanding of the instructions for use
  • acquaintance with the possibilities and limitations of the product
  • adequate apprenticeship in appropriate techniques and methods of use
  • understanding and acceptance of the risk involved

In case of doubt or problem of understanding, contact SINGING ROCK.