INOS 3.5

INOS 3.5 / W1501XX03
Light, practical, comfortable and very strong retractable fall arrester. Suitable for multiple uses when working at heights allowing the maximum freedom of movement.

  • compact size and light weight
  • robust aluminum alloy case with a swivel
  • equipped with dyneema webbing with the width of 25 mm and the length of 3.5 m
  • fall is captured immediately by locking the dyneema webbing, the fall arrest system is similar to the car safety belt
  • webbing is always slightly stretched by a spring system or automatically released, at each moment thereby reduces the length of possible fall to a minimum
  • possible to use mainly at vertical use, max. angle allowance is 40° from vertical
  • model includes an EN 362 steel connector with a locking mechanism and a swivel
  • packaging also includes a 4.1 m accessory cord for lowering the connector
  • these devices are commonly used by workers on scaffolds, ladders and flat roofs


Weight: 1.9 kg (4.2 lb)
Material: casing - aluminum alloy, webbing - dyneema, connector - steel
Strength: 15 kN
Length: 3.5 m (11.5 ft)
Working load: 140 kg (309 lb)

Download

high resolution picture instructions of use

0120, EN 360

Related goods

  • TECHNIC

    TECHNIC

    Full body harness for work positioning and fall arrest / fully adjustable / 2 variants / S, M/L, XL / EN 358 • EN 361 • EN 813

  • JOULE 70

    JOULE 70

    Fall absorber / length 70 cm / length after fall arrest 115 - 118 cm / EN 355

  • OVAL STEEL CONNECTOR / SCREW

    OVAL STEEL CONNECTOR / SCREW

    Oval steel connector / screw lock / Keylock / gate opening 18 mm / 30 kN / 176 g

  • SLING LANYARD

    SLING LANYARD

    Two-layer webbing with sewed eyes and wear indicator / length 60 - 150 cm / 22 kN / EN 354 • EN 795B

  • PILOT

    PILOT

    Removable anchor point for fall protection and multi-use / size 3/4" / strength 22 kN / weight 200 g

  • TOOL BAG

    TOOL BAG

    Hardware carrier and organizer / can be atached directly to the harness / max. load 10 kg / 405 g

  • KAPPA WORK

    KAPPA WORK

    Lightweight working helmet / weight 330 g / size 53-62 cm / EN 397

Warning

Activities at height such as climbing, via ferrata, caving, rappelling, ski-touring, rescue, work at height and exploration are dangerous activities, which may lead to severe injury or even death.
This the following is essential before use:

  • careful reading and understanding of the instructions for use
  • acquaintance with the possibilities and limitations of the product
  • adequate apprenticeship in appropriate techniques and methods of use
  • understanding and acceptance of the risk involved

In case of doubt or problem of understanding, contact SINGING ROCK.