Anchor and Belay devices

Eights and tubes
-
FIGURE 8 M
Belay and rappel device of classic proven shape / for ropes of smaller diameters / 25 kN / 104 g
-
FIGURE 8 L
Belay and rappel device of classic proven shape / for ropes of bigger diameters / 30 kN / 125 g
-
BUDDY
Belay tube / for ropes with diameter of 7.8-11 mm / light and compact / 25 kN / 54 g
-
BUDDY SET
Set of belay tube and HMS carabiner / for ropes with diameter of 7.8-11 mm / 25 kN / 119 g
-
SHUTTLE
Belay and rappel device / for ropes with diameter of 7.8-10.5 mm / wide range of use / 25 kN / 65 g
-
FIGURE 8 BENT
Bent figure eight with two rappelling modes / 25 kN / 85 g
Ice screws
-
SPIN
Hardened steel ice screw / length 120-220 mm / weight 100-150g
Descenders
-
SIR
Robust multipurpose device for use in industrial rope access / easy and intuitive handling / 365 g
-
DOUBLE STOP PLUS
Descender with double locking and selfbraking anti-panic system / for sigle rope / 421 g
-
INDY EVO
Descender for sigle rope with anti-panic system / can also be used for rescue / 450 g
RedBlock
-
REDBLOCK
Device, that extends lifetime of the rope when top-roping / 26 kN / 375 g
Hanger plates
-
HANGER PLATE / stainless steel
Hanger plates for permanent anchor point / for bolts Ø 10 and 12 mm / 25 kN
-
HANGER PLATE / zinc-coated steel
Hanger plates for permanent anchor point / for bolts Ø 10 and 12 mm / 25 kN
-
RAPPELING STATION 12 mm
Zinc-coated steel rappeling station / for use with bolts of diameter 12 mm / 25 kN
-
HANGER WITH BOLT / stainless steel
Hanger plates with bolts for permanent anchor point / bolt diameter 10 or 12 mm / 25 kN
-
HANGER WITH BOLT / zinc-coated steel
Hanger plates with bolts for permanent anchor point / bolt diameter 10 or 12 mm / 25 kN
Rigging plates
-
RIGGING PLATE 1/3
Device for multi-point anchoring / allows direct attachment of ropes to any hole / 36 kN / 65 g
-
RIGGING PLATE 3/5
Device for multi-point anchoring / provides plenty of attachment holes / 50 kN / 145 g
Glue in anchor
-
GLUE IN ANCHOR
Stainless steel permanent anchor point / length 80 mm / diameter 10 mm / weight 120 g
Rotating anchor
-
TWISTER
Rotating anchor / working load 4 kN / strength 22 kN / weight 91 g
Pitons and hooks
-
PITON A3
Hardened steel piton for thinner cracks / thickness 3 mm / length 3, 5 or 7 cm / weight 54 g (L5)
-
PITON A5
Hardened steel piton for medium-width cracks / thickness 5 mm / length 5, 7 or 9 cm / weight 103 g (L7)
-
PITON V
Hardened steel V piton for larger cracks / width 8-13 mm / length 8, 10 or 12 cm / weight 84 g (L8)
-
ULTIMA
Special piton for thin cracks up to 2,5 mm wide / strength 5 kN / weight 21 g
-
ROCK HAMMER
Classic rock hammer for big wall climbing, first ascents or work at height / weight 590 g
-
CAPTAIN
Hook for small to medium flakes, edges and rugosities / length 13 cm / weight 46 g
-
SENTINEL
Hook for fragile edges and drilled holes / length 13 cm / weight 43 g